ST 1288 length gauge Heidenhain Vietnam
ST 1288 length gauge Heidenhain Vietnam (383978-01 Gauge) là đầu dò quang học Heidenhain thuộc dòng sản phẩm SPECTO series, được thiết kế đặc biệt
Thông số ST 1288 length gauge Heidenhain Vietnam
Ứng dụng Encoder Heidenhain Việt Nam
- Trạm đo lường và kiểm tra: Sử dụng để thu thập và đánh giá dữ liệu đo lường, với các chức năng như kiểm tra dung sai, lưu trữ giá trị min/max và phân loại sản phẩm.
- Nhiệm vụ định vị đơn giản: Áp dụng trong việc điều khiển vị trí cho các thiết bị như máy cưa tròn, hành trình ép, hoặc bàn xoay phụ trên máy công cụ.
- Tự động hóa đơn giản: Với các đầu vào và đầu ra chuyển mạch, ND 287 có thể tích hợp vào các hệ thống tự động hóa cơ bản.
Thiết bị sẵn giá , xem tại đây
100% EU Origin | Baumer Vietnam | Code: 10124787 Description: FHDM 12P5001/S36A Diffuse sensors with background suppression |
100% EU Origin | Baumer Vietnam | Code: 11057349 clutch Description: K35 WD 11 + 11 Spring disc clutch |
100% EU Origin |
Baumer Vietnam | K35 K35 WD 11 + 11 Spring disc clutch D = D1 = 11H7 |
100% EU Origin |
Baumer Vietnam | Material No. 11092278 POG9 DN 1000 TTL Encoder |
100% EU Origin | Baumer Vietnam | Code: 11226818 Level Sensing Description: PL20H-11111.111012.A03021010030 Level measurement |
100% EU Origin ZIEHL-ABEGG Vietnam “190653
External rotor motor with K-flange Type: MK137-2DK.07.N
3~MOT 208/360V D/Y 45Hz 0,70kW
4.4/2.6A 2340/MIN COSY 0.70 40°C
IP54Z THCL 155
-NOT VOLTAGE CONTROLLABLEConnection cable lateral, 65cm.
Circuit diagram: 1360-106X , supplied loose.
Rating plate: 1x fixed, 1x loose.
Installation position H.
Motor protection: Thermostat switch
Special impregnation HV.
Motor 1-layer paint finish RAL 9005 (jet black)
in resistance class 1 (L-TI-0596)
Dust-tight design with fleece tape.
Centring surfaces on rotor and stator flange unpainted.
Maximum cutting force 90N at a speed of 5000 rpm
Ball bearing with long-term lubrication.
This motor is designed for the speed specified on the rating plate.
speed and frequency and may only be operated in
operated in conjunction with a frequency inverter.
Operation at 50 Hz or 60 Hz and without a frequency inverter is not permitted.”
Đánh giá
Chưa có đánh giá nào.